Characteristic：          

1 faster processing speed: processing current up to 5-7A (than the previous generation of high-speed machine speed up to 30%), above the processing speed of up to 8000-12000mm L / h, 2-3 times of ordinary cutting line.          

2 wire wear reduced times: the minimum loss of 8000mm L / hour speed is only 0.01mm/150000 - mm, a tube of molybdenum wire service life can reach more than 400 thousand mm2, and common line cutting processing only 20-30 million square millimeter.          

3 with automatic adjustment function: according to the thickness of the workpiece, processing materials, wire, the actual situation of the automatic adjustment of the processing state, not only to improve the speed, reduce the loss, and to avoid the occurrence of broken wire.          

4 high reliability: the use of modular design, the circuit is simple, less components, the failure rate is very low.

Characteristics of new structure line cutting machine:          

1 threading efficiency increased by more than 3 times.          

2 the high rigidity of the wire frame is high, and the taper head is installed on the back end of the upper wire arm. Improve the stability, to ensure a good finish.          

3 machine tool using resin sand casting, artificial failure and tempered for two times to ensure the stability of machine tool.          

4 the overall flatness and straightness of the machine tool is higher than the national standard, with the military grade parts and strict control, to ensure the high precision of the machine tool.